Some parts of the diesel generator set will also affect the power change of diesel generator equipment. The main reasons are:
1. The ignition time is incorrect and needs to be adjusted;
2. The fuel filter device is too dirty and the fuel injection volume is not enough, it must be replaced or cleaned;
3. The air filter is too dirty and the inhaled air is not enough. At this time, the air filter must be cleaned or replaced.
When the diesel engine is working, many parts slide or rotate relative to each other at a high speed under a certain load, such as piston and cylinder liner, crankshaft and bearing, etc. Although the surfaces of these parts are lubricated to different degrees, with the increase of working time, the surfaces in contact with each other will inevitably wear due to friction, and gradually destroy the original size and geometry.
This normal wear and tear is often referred to as "natural wear" and is actually unavoidable. There is also a certain relationship between the power of the diesel engine and the amount of air and the amount of diesel it can burn.
